Size Guide
Refer to the size charts in each product page for individual product sizing.
Our size guide shows product measurements taken when products are laid flat. Actual product measurements may vary by up to 1" (2.5cm).
All measurements are our website are in imperial.
Care Guide
Wash on the reverse side with neutral detergents. Do not soak, expose to the sun, and bleach. Iron, steam, or tumble dry at low temperature (max 30℃ or 90℉). Slight bleeding may occur during the first wash. It’s best to wash like-colored garments together.
HOW TO MEASURE
T-shirts
A. Chest
Place the end of the tape with the underarm seam, then stretch it horizontally across the garment to reach the underarm seam on the other side.
B. Shoulder
Place the fabric tape from shoulder point to shoulder point, straight across back. Measure from armhole seam to armhole seam.
C. Length
Take the measurement straight down from high point shoulder to the bottom edge of the garment.
D. Sleeve length
Measure the length from the tip of the shoulder to the bottom edge of sleeve, including cuff.
Long Sleeves/Sweatshirts
A. Chest
Place the end of the tape with the underarm seam, then stretch it horizontally across the garment to reach the underarm seam on the other side.
B. Shoulder
Place the fabric tape from shoulder point to shoulder point, straight across back. Measure from armhole seam to armhole seam.
C. Length
Take the measurement straight down from high point shoulder to the bottom edge of the garment.
D. Sleeve length
Measure the length from the tip of the shoulder to the bottom edge of sleeve, including cuff.
Hoodies
A. Chest
Place the end of the tape with the underarm seam, then stretch it horizontally across the garment to reach the underarm seam on the other side.
B. Shoulder
Place the fabric tape from shoulder point to shoulder point, straight across back. Measure from armhole seam to armhole seam.
C. Length
Take the measurement straight down from high point shoulder to the bottom edge of the garment.
D. Sleeve length
Measure the length from the tip of the shoulder to the bottom edge of sleeve, including cuff.
Tank Tops
A. Chest
Place the end of the tape with the underarm seam, then stretch it horizontally across the garment to reach the underarm seam on the other side.
B. Shoulder
Place the fabric tape from shoulder point to shoulder point, straight across back. Measure from armhole seam to armhole seam.
C. Length
Take the measurement straight down from high point shoulder to the bottom edge of the garment.
Shorts
A. Outseam
Run the fabric tape from the top of the waistband, along the outer side of the pant leg, all the way down to the bottom of the hem.
B. Waist
Measure across the top edge of the waistband from one corner to the other.The measurement in the size chart refers to twice the width of the waist when laid flat.
Pants
A. Outseam
Run the fabric tape from the top of the waistband, along the outer side of the pant leg, all the way down to the bottom of the hem.
B. Waist
Measure across the top edge of the waistband from one corner to the other.The measurement in the size chart refers to twice the width of the waist when laid flat.
C. Hip
Measure straight across the widest area of the seat of the pants(usually 9” down from the top of the front waistband).The measurement in the size chart refers to twice the width of the hip when laid flat.
D. Leg opening
Lay the bottom cuff flat and measure the width of the cuff.The measurement in the size chart refers to twice the width of the leg opening when laid flat.
